Adaptive Seating

Home » Resources » Safety Reviewed Components » Adaptive Seating

Mobility Components - Reviewed for You

Safety-Reviewed Vehicle Components

The following manufacturers have voluntarily submitted safety data for the mobility equipment components listed below. Component safety review is conducted on a case-by-case basis. For additional information please contact the NMEDA office at 813.264.2697. A list of applicable FMVSS standards for components can be found here.

Adaptive Seating

Manufacturers QAP

Adapt Solutions

MQAP Accredited

 

MANUFACTURER

SEAT TYPE/VEHICLE

C/FMVSS 208¹ OCCUPANT FRONTAL CRASH PROTECTION

F/CMVSS 207 / 210²

SEAT BELT ANCHORAGES

Adapt Solutions

XL-BASE

Chrysler Town & CountryDodge Caravan

2008- 2019

2008 to 2010

C/FMVSS: PASS


2011 – 2016

CMVSS: PASS

Front row passenger side: PASS


Second row passeger side: PASS


Adapt Solutions

XL-BASE

Honda Odyssey

2011- 2017

C/FMVSS: PASS

Front row passenger side: PASS


Second row passeger side: PASS


1 The frontal, rigid barrier, impact with 50th percentile male test dummies was evaluated.

2 All requirements of the C/FMVSS 207 and 210 were reviewed.

Manufacturers QAP

B&D Independence

MQAP Accredited

 

MANUFACTURER

COMPONENT/MODEL

TESTED IN VEHICLE MAKE/MODEL/YEAR

F/CMVSS 207 / 210

SEAT BELT ANCHORAGES

B&D Independence, Inc.

C61 Power Transfer Seat Base

Tested with Ford Explorer

OEM power seat

Braun Ford Explorer MXV side entry lowered floor

2017 platform

Driver side: PASS¹


Passeger side: PASS¹


B&D Independence, Inc.

C62 Power Transfer Seat Base

2017 to 2018 Braun Side Entry Chrysler Pacifica

Front row passenger side: PASS² ³


Second row passeger side: PASS² ³


1 Continuous audible signal provided to alert PTSB occupant when the PTSB is adjusted beyond the 207/210 tested range while the vehicle is in motion.

2 The PTSB was tested at its maximum adjustment height (full up), which is the worst-case test scenario to cover all height adjustments. The maximum height adjustment of the PTSB may take the seat vertical travel past the occupant protection zone (air bags, etc.), but it was agreed with the company that some disabled drivers may have to adjust the seating system to this height. Therefore, this was considered to be the extreme test position to certify all positions within the vertical range – including the positions within the occupant protection zone.

3 The system was tested with the OEM power seat in its rearward adjustment position for the forward pull test as required by the standard and with the PTSB in its default position of 4″ back from the most forward position, since the PTSB is not a seat adjustment device and is locked-out in the default position when the vehicle is in motion, except in special prescribed circumstances.

Manufacturers QAP

BraunAbility

MQAP Accredited

 

MANUFACTURER

COMPONENT/MODEL

TESTED IN VEHICLE MAKE/MODEL/YEAR

F/CMVSS 207 / 210 / 202

SEAT BELT ANCHORAGES

BraunAbility

Power Transfer Seat Base

TurnyEVO

Front Row Freedman Seats

Second Row Driver OEM Seat

Second Row Passenger Freedman Seat

2019–2021 Chrysler Pacifica

PASS